View source for eventMacro

== Description ==
* With this plugin you can create complex blocks of conditions called automacros and blocks of consecutive actions called macros.
* Macros can be called by one or more automacros when their conditions become true or be called by hand using a console command.
* Automacros have simple to use conditions like base level, zeny, job class and many others.
* Macros can be as simple as 'say something in chat' or 'save in kafra' and as complex as 'do a complete quest'.
* This page was last updated with the current version at the moment being 324.

== Installation ==
* Download the eventMacro plugin. You can download it from the following link:
** [https://github.com/Henrybk/eventMacro '''Github''' Head version from the developer page]

* Go to your OpenKore main folder (''the folder which contains the file openkore.pl'') and create a subfolder called '''plugins''', if there isn't already one. Create a subfolder '''eventMacro''' in it.
* Inside the eventMacro plugin's zipfile (normally eventMacro-master.zip), you will find the file '''eventMacro.pl''', the folder '''eventMacro''' and other files and folders. Extract them to your plugins/eventMacro folder, so '''eventMacro.pl''' ends up in plugins/eventMacro/eventMacro.pl.
* In your OpenKore control folder, create a blank file named '''eventMacros.txt'''. In this file you will put your macros/automacros. 


After installation, your OpenKore file tree should look like this (''ignoring OpenKore's own files''): 
 openkore
 |-- openkore.pl
 |-- control
 |   |-- eventMacros.txt
 |-- fields
 |-- logs
 |-- plugins
 |   |-- eventMacro
 |   |   |-- eventMacro
 |   |   |   |-- Automacro.pm
 |   |   |   |-- Condition.pm
 |   |   |   |-- Core.pm
 |   |   |   |-- Data.pm
 |   |   |   |-- FileParser.pm
 |   |   |   |-- Lists.pm
 |   |   |   |-- Macro.pm
 |   |   |   |-- Runner.pm
 |   |   |   |-- Utilities.pm
 |   |   |   |-- Validator.pm
 |   |   |   |-- Validator
 |   |   |   |   |-- ListMemberCheck.pm
 |   |   |   |   |-- NumericComparison.pm
 |   |   |   |   |-- RegexCheck.pm
 |   |   |   |-- Conditiontypes
 |   |   |   |   |-- ListConditionEvent.pm
 |   |   |   |   |-- ListConditionState.pm
 |   |   |   |   |-- MultipleValidatorEvent.pm
 |   |   |   |   |-- MultipleValidatorState.pm
 |   |   |   |   |-- NumericConditionEvent.pm
 |   |   |   |   |-- RegexConditionEvent.pm
 |   |   |   |   |-- RegexConditionState.pm
 |   |   |   |   |-- SimpleEvent.pm
 |   |   |   |-- Condition
 |   |   |   |   |-- AttackEnd.pm
 |   |   |   |   |-- AttackStart.pm
 |   |   |   |   |-- AttackStartRegex.pm
 |   |   |   |   |-- BaseLevel.pm
 |   |   |   |   |-- CartCurrentSize.pm
 |   |   |   |   |-- CartCurrentWeight.pm
 |   |   |   |   |-- CartMaxSize.pm
 |   |   |   |   |-- More conditions...
 |   |   |-- test
 |   |   |   |-- unit_tests.pl
 |   |   |   |-- RunnerStatementTest.pm
 |   |   |   |-- RunnerParseCommandTest.pm
 |   |   |   |-- LoadConditionsTest.pm
 |   |   |   |-- GlobalVarRegexTest.pm
 |   |   |   |-- FindVarTest.pm
 |   |   |   |-- DynamicAutoVarsTest.pm
 |   |   |   |-- CoreVarFunctionsTest.pm
 |   |   |   |-- Validator
 |   |   |   |   |-- ListMemberCheckTest.pm
 |   |   |   |   |-- NumericComparisonTest.pm
 |   |   |   |   |-- RegexCheckTest.pm
 |   |   |   |-- textfiles
 |   |   |   |   |-- DynamicAutoVarsTest.txt
 |   |   |   |   |-- DynamicAutoVarsTest2.txt
 |   |   |   |   |-- DynamicAutoVarsTest3.txt
 |   |   |   |   |-- empty.txt
 |   |   |   |   |-- LoadConditionsTest.txt
 |   |   |-- eventMacro.pl
 |-- src
 |-- tables

== Console Commands ==
=== Syntax ===
 eventMacro [MACRO|auto|list|status|check|stop|pause|unpause|var_get|var_set|enable|disable] [extra]

; eventMacro MACRO
:* Runs macro MACRO.

{|class="indextable" style="text-align:center;"
! Option
! Value
! Description
|-
|align=center| -repeat
|align=center| n
|align=center| repeat the macro '''n''' times 
|-
|align=center| -overrideAI
|align=center| none
|align=center| override openkore's AI 
|-
|align=center| -macro_delay
|align=center| delay
|align=center| override global macro_delay for this macro 
|-
|align=center| -exclusive
|align=center| none
|align=center| do not allow automacros to cancel this macro 
|- 
|align=center| -orphan
|align=center| method
|align=center| use method for handling orphaned macros
|}


Parameters for the macro can be specified after a double dash (--). These parameters are saved to the variables $.param1 to $.paramN. Example: 

 macro foo {
  log Parameter 1 is $.param1
  log Parameter 2 is $.param2
 }


When called as '''''eventMacro foo -- foo bar''''' it would print out 

 [eventmacro log] Parameter 1 is foo
 [eventmacro log] Parameter 2 is bar

; eventMacro auto AUTOMACRO
: Get info on an automacro and it's conditions

; eventMacro list
: Lists available macros and automacros

; eventMacro status [macro|automacro]
: Shows current status of automacro, macro or both

; eventMacro check [force_stop|force_start|resume]
: Sets the state of automacros checking

; eventMacro stop
: Stops current running macro

; eventMacro pause
: Pauses current running macro

; eventMacro unpause
: Unpauses current running macro

; eventMacro var_get
: Shows the value of one or all variables

; eventMacro var_set
: Set the value of a variable

; eventMacro enable [automacro]
: Enable one or all automacros

; eventMacro disable [automacro]
: Disable one or all automacros


== Configuration files ==

; control/eventMacros.txt
: Put your macros and automacros in here. You can change the file's name depending on what you configured on config ''eventMacro_file''.

; control/timeouts.txt
: Add '''''eventMacro_delay''''' and set it to the number of seconds you want the plugin to pause between commands. 

; control/config.txt
{|class="indextable" style="text-align:center;"
!Option
!Value
!Default
!Description
|-
|align=center| eventMacro_orphans
|align=center| terminate <br/> reregister <br/> reregister_safe <br/> terminate_last_call
|aling=center| terminate
|align=center| How will openkore deal with macros that got cleanead out of AI queue
|-
|align=center| eventMacro_file
|align=center| file name
|aling=center| eventMacros.txt
|align=center| file containing the macros and automacros
|-
|align=center| eventMacro_CheckOnAI
|align=center| combination of 'auto', 'manual' and 'off'
|aling=center| auto
|align=center| In which AI states automacros will be checked
|}

== Macro Syntax ==
 macro MacroName {
    do this..
    and that..
    yattayatta..
 }
* You can use any name you want for your macro. Be careful not to make two macros with the same name.
* Macros is executed from top to bottom.
* Only macro instructions can be used in macros. If you need to use console command, use '''do'''.

=== Macro Instructions ===

; do <''command''>
: Run <''command''>, as if it was entered in OpenKore terminal. Commands are from [[Console Commands]].

 macro foo {
    do move 123 234 prontera
    do sit
    do c hello world
 }

<span style="color:red">The command ''ai clear'' is disabled by default in the plugin.</span style><br>
<span style="color:red">If has a macro the command ''do ai manual'' or ''do ai off'' , the macro will stop its execution.</span style>


; log <''text''>
: Prints a text in the console. Can contain macro $variables and @stuff.

 macro foo {
   log This line logs a text to console.
   log All your base are belong to us!
 }


; pause [<''n''>] 
: Pauses the macro for '''n''' seconds.

 macro foo {
    log It's 10:00:00
    pause 10
    log Now it's 10:00:10 
    log 10 seconds have passed after the first print.
 }

<span style="color:red">''pause'' not only pauses the macro running, pauses all our character's actions.</span style>


; call <''macroname''> [<''n''>] 
: Calls macro <''macroname''> [<''n''> times]. When <''macroname''> is finished the current macro continues. 


; release (<''name''> | all)
: Reenables a locked automacro ("run-once" keyword or locked by "lock") or reenables all automacros when using release all.


; lock (<''name''> | all)
: Locks an automacro and disables it's checks. To lock all automacros, use ''lock all''.


; stop
: Immediately terminates the running macro.


; set <''option''> <''value''>
: Sets macro features:
:* orphan method
:* macro_delay timeout
:* overrideAI [0|1]
:* repeat times
:* exclusive [0|1]

=== Variables ===

* You can work with variables. Variable declaration is not needed. All macro variables are global.
* EventMacro variable system is based in perl and has support for scalars, arrays and hashes.
* Variable names may only contain letters and numbers.
* If you want to use any variable without replacing it for it's value you should escape it with '''''\'''''.

==== Types of variables and their definitions ====
: '''Scalar'''
:* Scalar variables can hold a single piece of information, like a number or a string of characters.
:* Scalars start with the symbol '''$'''.

: '''Array'''
:* Array variables hold a '''list''' of things.
:* Each member inside the array list has a index, which is it's position inside the list.
:* The first index of an array is always '''0''', and the '''last''' is always the '''size of the array minus 1'''.
:* Arrays start with the symbol '''@'''.

: '''Hash'''
:* Hash variables hold many '''pairs''' of things.
:* Each hash pair in consisted of a '''key''' and a '''value'''.
:* Each key has only one value, but many keys can have the same value.
:* Hashes start with the symbol '''%'''.

==== Declaration and usage ====

===== Scalars =====

Set value of scalar variable:
 $variable = value

Get a value of variable (note that this is "Macro Syntax" section, so it doesn't apply to automacro conditions, config options etc):
 $variable

 macro Hello {
    $var = Hello
    $var1 = World!
    log $var $var1
 }

This would print in the console:

 [eventmacro log] Hello World!

It is possible to increment and to decrement a variable using ''$variable++'' or ''$variable--''.

 macro Counter {
     $counter = 0
     log Counter is at $counter
     $counter++
     log Now it's $counter
     $counter--
     log It's back to $counter
 }

The result is:
 [eventmacro log] Counter is at 0
 [eventmacro log] Now it's 1
 [eventmacro log] It's back to 0

You can also unset/vanish the existing variable using ''''undef'''' or ''''unset'''':
 $x = 1
 log \$x is $x
 $x = undef  # or you can use 'unset'
 log \$x now vanished: $x
 
Variable assignment doesn't evaluate, it only does macro substitutions, so use @eval for calculations.

 macro math {
     $num = 2
     $num2 = 3
     $result = @eval($num+$num2)
     log sum of $num and $num2 is $result
 }

The result is:
 [eventmacro log] sum of 2 and 3 is 5.

===== Arrays =====

Set value of array variable, it must be declared with it's members inside parentheses, separated by comma:
 @variable = (member0, member1, member2)

Get a value of a certain index, use '''$''' at the start instead of '''@''', and put the index after the variable name, encapsulated by '''[''' and ''']''':
 $variable[index]

Get a size of the variable:
 @variable

 macro Hello {
    @var = (drops, poring)
    log The size of \@var is @var, the first member is $var[0] and the second is $var[1]
 }

This would print in the console:

 [eventmacro log] The size of @var is 2, the first member is drops and the second is poring

* The definition of separate array members is the same as normal scalar.

They can be set:
 $myarray[0] = harry
 $myarray[1] = potter

They can be incremented and decremented:
 macro Counter {
     $counterArray[1] = 0
     log \$counterArray[1] is at $counterArray[1]
     $counterArray[1]++
     log Now it's $counterArray[1]
     $counterArray[1]--
     log It's back to $counterArray[1]
 }

And they can be unset:
 $var[5] = 1
 log \$var[5] is $var[5]
 $var[5] = undef  # or you can use 'unset'
 log \$var[5] now vanished: $var[5]

; Array Keywords
: There are 4 keywords which can be used on arrays:
:* push: Adds a new element to the end fo the array, increasing it's size by 1.
:* pop: Removes the last element from the end of the array, decreasing it's size by 1.
:* shift: Removes the first element of the array and moves the whole array 1 index to the left, decreasing it's size by 1.
:* unshift: Adds a new element to the start of the array and moves the whole array 1 index to the right, increasing it's size by 1.


; push
push syntax is as follows:
 &push(@array, newmember)

push must have 2 parameters: the array you want to push, and the new member to be pushed.

Here's an example of an array started from scratch using push:
 &push(@names, john)
 &push(@names, mary)
 &push(@names, juan)

This is the array afterwars:
 (john, mary, juan)

And this macro:
 macro print_names {
     &push(@monsters, poring)
     &push(@monsters, wolf)
     &push(@monsters, maya)
     log The array \@monsters has size @monsters and it's members are $monsters[0], $monsters[1] and $monsters[2]
 }

Prints this:
 [eventmacro log] The array @monsters has size 3 and it's members are poring, wolf and maya


; pop
pop syntax is as follows:
 &pop(@array)

pop must have 1 parameter: the array you want to pop.

Here's an example of an array, and it after a pop:
 @jobs = (teacher, doctor, seller)
 log The array \@jobs has size @jobs and it's members are $jobs[0], $jobs[1] and $jobs[2]
 &pop(@jobs)
 log The array \@jobs has size @jobs and it's members are $jobs[0], $jobs[1]
 &pop(@jobs)
 log The array \@jobs has size @jobs and it's members are $jobs[0]


This prints this:
 [eventmacro log] The array @jobs has size 3 and it's members are teacher, doctor and seller
 [eventmacro log] The array @jobs has size 2 and it's members are teacher, doctor
 [eventmacro log] The array @jobs has size 1 and it's members are teacher


; shift
shift syntax is as follows:
 &shift(@array)

shift must have 1 parameter: the array you want to shift.
Here's an example of an array, and it after a shift:
 @jobs = (teacher, doctor, seller)
 log The array \@jobs has size @jobs and it's members are $jobs[0], $jobs[1] and $jobs[2]
 &shift(@jobs)
 log The array \@jobs has size @jobs and it's members are $jobs[0], $jobs[1]
 &shift(@jobs)
 log The array \@jobs has size @jobs and it's members are $jobs[0]


This prints this:
 [eventmacro log] The array @jobs has size 3 and it's members are teacher, doctor and seller
 [eventmacro log] The array @jobs has size 2 and it's members are doctor, seller
 [eventmacro log] The array @jobs has size 1 and it's members are seller


After a shift the whole array is moved to the left, so after the first shift the member 'seller' which was in index 2 moved to index 1,
and after the second shift it moved to index 0.


; unshift
unshift syntax is as follows:
 &unshift(@array, newmember)

push must have 2 parameters: the array you want to push, and the new member to be pushed.

Here's an example of an array started from scratch using push:
 &unshift(@foods, bread)
 &unshift(@foods, carrot)
 &unshift(@foods, apple)

This is the array afterwars:
 (apple, carrot, bread)

Note that since unshift puts the new member in the start of the array the first member is now 'apple' which was added last.

And this macro:
 macro print_names {
     @array = (apple, banana)
     log The array \@array has size @array and it's first member is $array[0], and the second is $array[1]
     &unshift(@array, pineapple)
     log The array \@array has size @array and it's first member is $array[0], and the second is $array[1]
     &unshift(@array, melon)
     log The array \@array has size @array and it's first member is $array[0], and the second is $array[1]
 }

Prints this:
 [eventmacro log] The array @array has size 2 and it's first member is apple, and the second is banana
 [eventmacro log] The array @array has size 3 and it's first member is pineapple, and the second is apple
 [eventmacro log] The array @array has size 4 and it's first member is melon, and the second is pineapple

===== Hashes =====

Set value of hash variable, it must be declared with it's pairs inside parentheses, separated by comma, the key and the value must be separated by '''=>''':
 %variable = (key1 => value1, key2 => value2, key3 => value3)

Get a value of a certain key, use '''$''' at the start instead of '''%''', and put the key after the variable name, encapsulated by '''{''' and '''}''':
 $variable{key1}

* Keys can contain letters and numbers.

Get a size of the variable:
 %variable

 macro Hello {
    %ages = (john => 25, george => 32)
    log John is $ages{john} years old, and George is $ages{george} years old
 }

This would print in the console:
 [eventmacro log] log John is 25 years old, and George is 32 years old

* The definition of separate hash members is the same as normal scalar.

They can be set:
 $name{first} = harry
 $name{last} = potter

They can be incremented and decremented:
 macro Counter {
     $hash{monterskilled} = 0
     log \$hash{monterskilled} is at $hash{monterskilled}
     $hash{monterskilled}++
     log Now it's $hash{monterskilled}
     $hash{monterskilled}--
     log It's back to $hash{monterskilled}
 }

And they can be unset:
 $myhash{value} = 1
 log \$myhash{value} is $myhash{value}
 $myhash{value} = undef  # or you can use 'unset'
 log \$myhash{value} now vanished: $myhash{value}


There's one hash '''keyword''', '''delete''', it completely delete a key from a hash, as if it had never existed.

'''delete''' usage:
 &delete($names{john})

example:
 macro print_names {
     %fruitsprice = (apple => 1000, banana => 700)
     log The hash \%fruitsprice has size %fruitsprice.
     log The apple price is $fruitsprice{apple} and the banana price is $fruitsprice{banana}
     &delete($fruitsprice{apple})
     log The hash \%fruitsprice has size %fruitsprice.
     log The price of banana is: $fruitsprice{banana}
     log The price of apple has vanished: $fruitsprice{apple}
 }

Prints this:
 [eventmacro log] The hash \%fruitsprice has size 2.
 [eventmacro log] The apple price is 1000 and the banana price is 700
 [eventmacro log] The hash \%fruitsprice has size 1.
 [eventmacro log] The price of banana is 700
 [eventmacro log] The price of apple has vanished:



== Special Variables == 
There are special read-only variables which begin with a dot. They are pre-defined with the eventMacro plugin.

{|class="indextable" style="text-align:center;"
!Variable
!Definition
!Example
|-
|$.map
|The map you're on
|prontera
|-
|$.pos
|Your current position
|123 234
|-
|$.time
|Current time as unix timestamp
|1482275422
|-
|$.datetime
|Current date and time
|Tue Dec 20 21:22:34 2016
|-
|$.hour
|Current hour time in 24h format
|14
|-
|$.minute
|Current minute time (0 - 59)
|34
|-
|$.second
|Current second time (0 - 59)
|53
|-
|$.hp
|Current HP
|2304
|-
|$.sp
|Current SP
|345
|-
|$.lvl
|Current base level
|175
|-
|$.joblvl
|Current job level
|60
|-
|$.spirits
|Number of current spirit spheres or coin flip's coins
|3
|-
|$.zeny
|Current zeny
|8478341
|-
|$.status
|Current statuses in a comma-separated list
|Attention Concentrate,Endure,Two-Hand Quicken
|-
|$.paramN
|Command line parameters (see [[EventMacro#Syntax|Syntax]])
|''N/A''
|-
|$.caller
|Nome da última automacro ativada
|''N/A''
|-
|$.weight
|Current weight of the character
|1948
|-
|$.maxweight
|Current maximum weight of the character
|2400
|}

== Special Keywords ==

These keywords (having common form of '''&<keyword>(<arguments>)''' each) interpolated to corresponding values just about anywhere inside ''macro blocks'' (except '''goto''', '''end''', label definitions, macro name in '''call''', '''set'''). Macro variables can be used in arguments, with the exception for <code>&nick()</code>.

; &npc (<''x''> <''y''> | /[http://www.regular-expressions.info/quickstart.html regexp]/i | "<''name''>")
: Return NPC's index which location is <''x''> <''y''> or NPC's name match regexp or NPC's name is equal to <''name''> . Returns -1 if no NPC was found. 

; &inventory (<''item''>)
: Returns inventory item index of <''item''>. If <''item''> doesn't exist, it returns -1.

; &Inventory (<''item''>)
: Same as '''&inventory''' but returns all matching indexes as a comma-separated list or -1 if the item was not found. 

; &invamount (<''item''>)
: Returns the amount of the given <''item''> in inventory.

; &cart (<''item''>)
: Returns cart item index of <''item''>. If <''item''> doesn't exist, it returns -1.

; &Cart (<''item''>)
: Same as '''&cart''' but returns all matching indexes as a comma-separated list or -1 if the item was not found.

; &cartamount (<''item''>)
: Returns the amount of the given <''item''> in cart.

; &storage (<''item''>)
: Returns storage item index of <''item''>. If <''item''> doesn't exist, it returns -1.

; &Storage (<''item''>)
: Same as '''&storage''' but returns all matching indexes as a comma-separated list or -1 if the item was not found.

; &storamount (<''item''>)
: Returns the amount of the given <''item''> in storage. 

; &player (<''name''>)
: Returns player index of player <''name''>. If player <''name''> is not found, it returns -1.

; &monster (<''name|ID''>)
: Returns monster index of monster <''name|ID''>. If monster <''name|ID''> is not found, it returns -1.

; &vender (<''name''>)
: Returns vender index of vender <''name''>. If vender <''name''> is not found, it returns -1.

; &store (<''name''>)
: Looks for an item in a store and returns index or -1 if the item was not found.

; &shopamount (<''item''>)
: Returns the amount of the given <''item''> in shop.

; &random ("<''argument1''>", "<''argument2''>", ...)
: Returns randomly one of the given arguments .

; &rand (<''n''>, <''m''>)
: Returns a random number between (and including) <''n''> and <''m''>.

; &eval (<''argument''>)
: Evaluates the given <''argument''>. '''Contents of &eval is Perl and does NOT have eventMacro plugin syntax, except for variables and @() substitution.'''

; &arg ("<''argument''>", <''n''>)
: Returns the <''n''>th word of <''argument''> or an empty string if the word index is out of range.

; &config (<''variable''>)
: Returns the value of <''variable''> specified in config.txt.

; &venderitem (<''name''>)
: Looks for an item in a player's shop and returns index or -1 if the item was not found. 

; &venderprice (<''indexID''>)
: Looks for an item in a player's shop and returns its price. 

; &nick (<''word''>)
: Escapes all the regexp metacharacters and some of the perl special characters with '''\''' (a backslash). Especially for player's name.

== Chaining commands ==
You can run multiple commands one after another without having to wait for openkore's AI or macro_delay or whatever. Just enclose these commands with '''[''' and ''']'''.  

 0 macro foo {
 1  do whatever
 2  log yet another line
 3  [
 4     do something
 5     do something else
 6     log foo
 7  ]
 8  log done
 9 }

Line 3 starts the chaining mode. This line has no delay. Lines 4, 5 and 6 are run as soon as the previous command has finished with no delay and they cannot be interrupted. Line 7 stops the chaining mode and line 8 will be run $macro_delay seconds after that.

== Sub-lines ==
Instead of using one command/var assignments per line, you can separate them using a semi-colon "''';'''".

 macro foo {
     $i = 1; pause 5; log \$i = $i; $ii = 2; $iii = 3; $i++; $ii--; lock automacroName; release automacroName; set overrideAI 1
 }

Commands separated by a semi-colon "''';'''" the normal macro_delay between them.

== Operators ==
Supported operators in eventMacro plugin are:

{|class="indextable" style="text-align:center;"
! Operator
! Description
|-
|align=center| <
|align=center| less than
|-
|align=center| <=
|align=center| less or equal to
|-
|align=center| == or =
|align=center| equal to <s>([http://forums.openkore.com/viewtopic.php?f=32&t=9042&p=37947&#p37947 link])</s>
|-
|align=center| >
|align=center| greater than
|-
|align=center| >=
|align=center| greater or equal to
|-
|align=center| !=
|align=center| not equal to
|-
|align=center| ~
|align=center| <left part> is element of <right part (''comma-separated list'')> 
|-
|align=center| =~
|align=center| <left part> matches [http://perldoc.perl.org/perlre.html regular expression] <right part>
<s>Further Discussion: [http://forums.openkore.com/viewtopic.php?f=32&t=966&start=73 ''Forums'']</s>
|-
|align=center| arg .. arg2
|align=center| Between arg and arg2. Where arg can be a number, a % or a variable.
|}

== Flow control and labels == 
* Just as prevalent in high-level languages constructs like "''if .. else''", "''while''", "''foreach''", "''for .. next''", "''do .. while''" and other commands.
* eventMacro plugin also has the operations "'''if'''", "'''else'''", "'''elsif'''", "'''switch'''", "'''case'''", "'''goto'''" and "'''while'''". There's also '''label''' declaration.

=== Syntax of command conditions ===
==== If ====
Right now, macro ''if'' conditions are very close to the perl ''if'' statements. It accepts unlimited number of statements in just one ''if'' condition line, regexp matching is allowed (unfortunately, no backreference using parenthesis) and the use of '''&&''' for '''and''' meaning and '''||''' for '''or''' meaning.

You can use a simple statement;
 if (arg1 <[[eventMacro#Operators|Operators]]> arg2) (goto <label> | call <macro> [<n>] | stop | { )

A simple statement with '''OR''' condition;
 if (arg1 <[[eventMacro#Operators|Operators]]> arg2 || arg3 <[[eventMacro#Operators|Operators]]> arg4) (goto <label> | call <macro> <n> | stop | { )

A simple statement with '''AND''' condition;
 if (arg1 <[[eventMacro#Operators|Operators]]> arg2 && arg3 <[[eventMacro#Operators|Operators]]> arg4) (goto <label> | call <macro> <n> | stop | { )

Or with both;
 if ((arg1 <[[eventMacro#Operators|Operators]]> arg2 || arg3 <[[eventMacro#Operators|Operators]]> arg4) && arg5 <[[eventMacro#Operators|Operators]]> arg6) (goto <label> | call <macro> <n> | stop | { )
 if ((arg1 <[[eventMacro#Operators|Operators]]> arg2 && arg3 <[[eventMacro#Operators|Operators]]> arg4) || arg5 <[[eventMacro#Operators|Operators]]> arg6) (goto <label> | call <macro> <n> | stop | { )
 if ((arg1 <[[eventMacro#Operators|Operators]]> arg2 && arg3 <[[eventMacro#Operators|Operators]]> arg4) || (arg5 <[[eventMacro#Operators|Operators]]> arg6 && arg7 <[[eventMacro#Operators|Operators]]> arg8)) (goto <label> | call <macro> <n> | stop | { )
 if ((arg1 <[[eventMacro#Operators|Operators]]> arg2 || arg3 <[[eventMacro#Operators|Operators]]> arg4) && (arg5 <condition> arg6 || arg7 <condition> arg8)) (goto <label> | call <macro> <n> | stop | { )
:* Notice inside of each brackets containing the '''AND''' and '''OR''' symbols.

Where;
:* ''arg'' can be a variable, a nested variable, a special keyword, &eval, letters and numbers or even a [[eventMacro#Perl_Subroutines|Perl Subroutines]] function.
:* <''label''>, the name of an existing label, can only contain letters and numbers
:* <''macro''>, the name of a existing macro, and
:* <''n''>, the number of times it will call the macro.
:* < ''{'' >, the beginning of a block of commands that will be executed if the condition is true, to finish it, use ''}''.


'''''Note:'''''
:* If ''<n>'' is defined as '''0''' or even if it is '''undefined''', the called macro name will run at once and then stop, not continuing the previous macro caller at a run time.
:* If ''<n>'' is greater than '''0''', the called macro name will run at '''n''' time/s and then continuing the previous macro caller line at a run time.


'''''Note²:''''' If statements are unlimited, you can use as many statements as you want.
 if (arg1 <[[eventMacro#Operators|Operators]]> arg2 || arg3 <[[eventMacro#Operators|Operators]]> arg4 || ... || arg'''''N''''' <[[eventMacro#Operators|Operators]]> arg'''''N+1''''') (goto <label> | call <macro> <n> | stop)

Where;
:* ''arg'' can be a variable, a nested variable, a special keyword, &eval or letters and numbers.
:* All the conditions is up to the '''''N'''''th argument <[[eventMacro#Operators|Operators]]> '''''N+1'''''th argument.
:* While '''''N''''' is an integer number/s which is greater than zero.

===== Postfix control =====
Another way to use the ''if'' is to put it at the end of the command.

 <command> if (arg1 <[[eventMacro#Operators|Operators]]> arg2)

The command before the ''if'' statement will only be executed if the condition is true.
The way to create the condition is the same as previously explained.

In this example below, the two commands are equivalent:

 call buy if ($.zeny > 1000)
 if ($.zeny > 1000) call buy

==== Else ====
In case ''if'' is used with open braces ( { ), it's possible to use the command '''else''' along closed braces (  } ) in the end of the command block ''if'', to start a new command block that will be executed if ''if'' is false. 

 if (arg1 <[[eventMacro#Operators|Operators]]> arg2) {
    command1
    command2
    ...
    commandN
 } else {
    command1
    command2
    ...
    commandN
 }

In this case, the first command block will be executed if the condition turns out being true. If it's false, the second command block (preceding by '''else''') will be executed.

'''''Note:''''' Inside braces you're allowed to use tons of commands.<br>
'''''Note:''''' It is not compulsory to wear '''else'''.

==== Elsif ====
It is like the else + if. The '''elsif''' is in the same place ''else'' with the difference being added conditions to its command block is executed if its conditions are true.

 if (arg1 <[[eventMacro#Operators|Operators]]> arg2) {
    command1
    command2
    ...
    comandoN
 } elsif (arg1 <[[eventMacro#Operators|Operators]]> arg2) {
    command1
    command2
    ...
    commandN
 } else {
    command1
    command2
    ...
    commandN
 }

In this case, the first block of commands will be executed if the condition is true. If it is false, the second block of commands (preceded by the '''elsif''') will be executed if its condition is true. Should also be false, the command blocks ''else'' to be executed.

'''''Note:''''' As in the ''else'', inside braces of '''elsif''' you're allowed to use tons of commands.<br>
'''''Note:''''' It is not compulsory to wear the ''else'' or '''elsif'''.

==== Switch/case ====
It's similar to ''if'' followed by enumerous ''elsif''. It's useful to leave the code cleaner when the paramater being analyzed is the same, this way you don't need to repeat it.

 switch (arg1) {
     case (<[[eventMacro#Operators|Operators]]> arg2) (goto <label> | call <macro> <n> | stop | {)
         (If you use "{", the commands should be used here and in a separated line that should be closed with the block "}")
     case (<[[eventMacro#Operators|Operators]]> arg2) (goto <label> | call <macro> <n> | stop | {)
         (If you use "{", the commands should be used here and in a separated line that should be closed with the block "}")
     ...
     else (goto <label> | call <macro> <n> | stop | {)
         (If you use "{", the commands should be used here and in a separated line that should be closed with the block "}")
 }

'''''Note:''''' The use of ''else'' is optional.
'''''Note:''''' In case that no ''case'' ends being true, ''else'' will be activate if it exists.

==== Examples ====
This macro will go a random walk
 macro walk {
    $num = &rand(1, 4)
    if ($num == 1) {
        do c I will follow the path 1
        do north
    }
    if ($num == 2) {
        do c I will follow the path 2
        do south
    }
    if ($num == 3) {
        do c I will follow the path 3
        do east
    }
    if ($num == 4) {
        do c I will follow the path 4
        do west
    }
 }

Simplified version of the above macro, using postfix control.
 macro walk {
    $num = &rand(1, 4)
    do c I will follow the path $num
    do north if ($num == 1)
    do south if ($num == 2)
    do east  if ($num == 3)
    do west  if ($num == 4)
 }

The following macro will tell if you've over 1.000z or 1.000z or less.
 macro checkZeny {
    if ($.zeny > 1000) {
       do c I've over 1.000z! 
    } else {
       do c I've 1.000z or less...
    }
 }

A little more complete than the above macro. Informa has more than 1.000z, has exactly 1.000z or has less than 1.000z with emoticons
 macro checkZeny {
    if ($.zeny > 1000) {
       do c I've over 1.000z! 
       do e money
    } elsif ($.zeny == 1000) {
       do c I have exactly 1.000z.
       do e !
    } else {
       do c I've 1.000z or less...
       do e panic
    }
 }

Similar to the above but with a different syntax
 macro checkZeny {
     switch ($.zeny) {
         case (> 1000) {
             do c I've over 1.000z! 
             do e money
         }
         case (== 1000) {
             do c I have exactly 1.000z.
             do e !
         }
         else {
             do c I've 1.000z or less...
             do e panic
         }
     }
 }

The below macro will print '''\$num is 1''' if $num == 1, '''\$num is 2''' if $num == 2, '''\$num is 3''' if $num == 3.
 macro checknum {
     $num = &rand(1, 3)
     if ($num == 1) goto one
     if ($num == 2) goto two
     if ($num == 3) goto three
     :one
     log \$num is 1
     stop
     :two
     log \$num is 2
     stop
     :three
     log \$num is 3
     stop
 }

The above macro can be written using '''call''' instead of '''goto'''.

 macro checknum {
     $num = &rand(1, 3)
     if ($num == 1) call one
     if ($num == 2) call two
     if ($num == 3) call three
 }
 macro one {
     log $num is 1
 }
 macro two {
     log $num is 2
 }
 macro three {
     log $num is 3
 }


A more complicated macro
 macro if {
  $i = 1
  log \$i = $i
  if (((($i = 1 || $i < 5 || $i ~ 0 .. 5) && &eval(&eval($i - 1) - &eval($i - 0)) = -1) && ($i != 2 && $i > 0 && &eval($i - 1) = 0) && ($i != 2 && $i > 0 && &eval($i - 1) = 0)) && $i = 1) goto somewhere
  if (($i = 1 || $i < 5 || $i ~ 0 .. 5) && ($i != "" && $i > 0 && &eval($i - 1) = 0)) goto somewhere
  if (&eval (&eval($i-1) - 1) != "") goto somewhere
  if ((($i = 1) || ($i < 5 && $i ~ 0 .. 5)) && ($i != "" && $i > 0 && &eval($i - 1) > 0)) goto somewhere
  log ko
  stop
 :somewhere
  log OK
 }

=== WHILE Loop ===
A ''while'' in macros means that certain commands will be ran while the defined conditions are met.
==== Syntax ====
 while (arg <condition> arg) as <loop>
     do bla bla
     ...
 end <loop>

Where;
:* ''arg'' can be a variable, a nested variable, a special keyword, &eval or letters and numbers. And 
:* <loop> is the name of the loop. You can give any name you want.
Conditions can be found on [[eventMacro#Operators|Operators]].

==== Examples ====
 macro while {
     $i = 0
     while ($i < 10) as loop
     log \$i = $i
     $i++
     end loop
 }

The result is
 [eventmacro log] \$i = 0
 [eventmacro log] \$i = 1
 [eventmacro log] \$i = 2
 [eventmacro log] \$i = 3
 [eventmacro log] \$i = 4
 [eventmacro log] \$i = 5
 [eventmacro log] \$i = 6
 [eventmacro log] \$i = 7
 [eventmacro log] \$i = 8
 [eventmacro log] \$i = 9

== Automacros ==

At this point, you can define macros and call them, typing 'eventMacro <macro name>' in OpenKore's console input.

Automacro is an automatic trigger for calling your macros, just like blocks in config.txt are automatic triggers for certain AI actions.

Automacro block consists of:
* One or more '''Parameters''' ('''call''' being the only required one).
* One or more '''Conditions'''.

Automacro does not trigger if there is currently running macro in exclusive mode. Otherwise, automacro clears macro queue (which means that all currently running macros are stopped) before call.

The point of automacro is that you use them to check for certain conditions and call your macro when all conditions are fulfilled.

=== Parameters ===

:* Each parameter can only be used once.
:* Parameters define the way the automacro or the called macro will work.
:* Most parameters have a default value that will be used when it is not defined.

; call
:* '''call''' is the only required parameter in every automacro.
:* '''call''' defines which macro the automacro will execute.
:* '''call''' can be a macro name or a macro block.

Example when using a macro name:
 automacro <automacro name> {
     <automacro conditions and parameters (and only them)>
     call myMacro
 }
 macro myMacro {
     <macro instructions (and only them, as this is regular macro)>
     # for example:
     do move prontera
     do move payon
 }

Example when using a macro block:
 automacro <automacro name> {
     <automacro conditions and parameters (and only them)>
     call {
         <macro instructions (and only them, as this is regular macro)>
         # for example:
         do move prontera
         do move payon
     }
 }


:* Two examples above do the same thing.
:* Note that the macro block used in the call parameter has the same rules as a normal macro block.


The first syntax is useful if you want more than one automacro to call one simple macro:
 automacro First {
     <conditions> 
     call print
 }
 automacro Second {
     <conditions> 
     call print
 }
 macro print {
     log $.caller triggered
 }


; delay
:* '''delay''' is an optional parameter.
:* '''delay''' defines the time in seconds to wait before executing the macro in call parameter.
:* If not used in the automacro the default value will be used, which is: 0.
:* Must have a numeric value.

 automacro <automacro name> {
     <automacro conditions and parameters (and only them)>
     delay 5
     call myMacro
 }
 macro myMacro {
     <macro instructions (and only them, as this is regular macro)>
     log This is being logged 5 seconds after the automacro activated
 }

; run-once
:* '''run-once''' is an optional parameter.
:* '''run-once''' defines if the automacro can activate only once, or multiple times.
:* If not used in the automacro the default value will be used, which is: 0.
:* When it's value is 1 the automacro will only activate once, when it's 0 it can activate multiple times.
:* To make an automacro with run-once value of 1 which already was already activated be able to run again you can use the command 'release' [[eventMacro#Macro Syntax|Macro Syntax]].

 automacro myautomacro {
     <automacro conditions and parameters (and only them)>
     run-once 1
     call myMacro
 }
 automacro myaotherauto {
     <automacro conditions and parameters (and only them)>
     run-once 0
     call myMacro
 }
 macro myMacro {
     <macro instructions (and only them, as this is regular macro)>
     log This macro will be called by myautomacro only once
     log but this macro can be called by myaotherauto many times
 }

; CheckOnAI
:* '''CheckOnAI''' is an optional parameter.
:* '''CheckOnAI''' defines in which AI states the automacro can activate.
:* The default value for this parameter can be set in the config key eventMacro_CheckOnAI [[eventMacro#Configuration files|Configuration files]].
:* If not used in the automacro the default value will be used, which is the config key eventMacro_CheckOnAI.
:* If eventMacro_CheckOnAI is not set in the config the default value will be used, which is: auto
:* It's values can be a combination of auto, manual and off, separated by comma.

 automacro MyAuto {
     <automacro conditions and parameters (and only them)>
     CheckOnAI manual
     call myMacro
 }
 macro myMacro {
     <macro instructions (and only them, as this is regular macro)>
     log This macro will only be called by MyAuto when AI is manual
 }
 
 automacro MyAuto2 {
     <automacro conditions and parameters (and only them)>
     CheckOnAI manual, off
     call myMacro
 }
 macro myMacro2 {
     <macro instructions (and only them, as this is regular macro)>
     log This macro will only be called by MyAuto2 when AI is manual or off
 }

; disabled
:* '''disabled''' is an optional parameter.
:* '''disabled''' defines if the automacro is active of not.
:* If not used in the automacro the default value will be used, which is: 0.
:* When it's value is 1 the automacro won't activate ever, when it's 0 it can activate normally.

 automacro MyAuto {
     <automacro conditions and parameters (and only them)>
     disabled 1
     call myMacro
 }
 macro myMacro {
     <macro instructions (and only them, as this is regular macro)>
     log This macro will never be called by MyAuto
 }
 
 automacro MyAuto2 {
     <automacro conditions and parameters (and only them)>
     disabled 0
     call myMacro
 }
 macro myMacro2 {
     <macro instructions (and only them, as this is regular macro)>
     log This macro will be called by MyAuto2 normally
 }

; overrideAI
:* '''overrideAI''' is an optional parameter.
:* '''overrideAI''' defines if eventMacro will put itself in the AI queue.
:* If not used in the automacro the default value will be used, which is: 0.
:* When it's value is 0 the macro will be put into AI queue as 'eventMacro' and the next macro command will only be run if current AI is 'eventMacro'.
:* When it's value is 1 the macro will not be put into AI queue and the next macro command will always be run.
:* It's important to note that when it's value is 1 since it won't be put into AI queue normal AI functions will continue as normal, like mob hunting or autostorage.

 automacro MyAuto {
     <automacro conditions and parameters (and only them)>
     overrideAI 0
     call myMacro
 }
 macro myMacro {
     <macro instructions (and only them, as this is regular macro)>
     do move prontera
     log This will only be printed when the 'move prontera' has been completed, since 'move' takes the first place in AI queue.
 }
 
 automacro MyAuto2 {
     <automacro conditions and parameters (and only them)>
     overrideAI 1
     call myMacro
 }
 macro myMacro2 {
     <macro instructions (and only them, as this is regular macro)>
     do move prontera
     log This will be printed after a macro_delay has passed before the last command, because it won't check AI queue.
 }

; exclusive
:* '''exclusive''' is an optional parameter.
:* '''exclusive''' defines if the macro can be interrupted or not.
:* If not used in the automacro the default value will be used, which is: 0.
:* When it's value is 0 the macro can be interrupted by other automacros.
:* When it's value is 1 the macro can not be interrupted by other automacros.

 automacro MyAuto {
     <automacro conditions and parameters (and only them)>
     exclusive 0
     call myMacro
 }
 macro myMacro {
     <macro instructions (and only them, as this is regular macro)>
     log This would probably cause a bug because the automacro would activate every AI cycle since the macro is interruptible.
 }
 
 automacro MyAuto2 {
     <automacro conditions and parameters (and only them)>
     exclusive 1
     call myMacro
 }
 macro myMacro2 {
     <macro instructions (and only them, as this is regular macro)>
     log Since exclusive is 1 the macro is now uninterruptible and will work properly.
 }

; priority
:* '''priority''' is an optional parameter.
:* '''priority''' defines the priority for activation the automacro has between all automacros, the lower the priority, the sooner ir will be checked.
:* If not used in the automacro the default value will be used, which is: 0.
:* Must have a numeric value.

 automacro MyAuto {
     <automacro conditions and parameters (and only them)>
     priority 5
     call {
         log This automacro will be checked after MyAuto2 because it's priority is higher
     }
 }
 
 automacro MyAuto2 {
     <automacro conditions and parameters (and only them)>
     priority 2
     call {
         log This automacro will be checked before MyAuto because it's priority is lower
     }
 }

; macro_delay
:* '''macro_delay''' is an optional parameter.
:* '''macro_delay''' defines the time in seconds to wait between macro commands.
:* If not used in the automacro the default value will be used, which is: 1.
:* Must have a numeric value.

 automacro MyAuto {
     <automacro conditions and parameters (and only them)>
     macro_delay 2
     call {
         log This will be printed at the macro execution
         log This will be printed 2 seconds after
     }
 }
 
 automacro MyAuto2 {
     <automacro conditions and parameters (and only them)>
     macro_delay 5
     call {
         log This will be printed at the macro execution
         log This will be printed 5 seconds after
     }
 }

; orphan
:* '''orphan''' is an optional parameter.
:* '''orphan''' defines how will eventMacro deal with macros when 'eventMacro' is cleaned out of AI queue.
:* The default value for this parameter can be set in the config key eventMacro_orphans [[eventMacro#Configuration files|Configuration files]].
:* If not used in the automacro the default value will be used, which is the config key eventMacro_orphans.
:* If eventMacro_orphans is not set in the config the default value will be used, which is: terminate
:* The valid values and their descriptions are the following:

{|class="indextable" style="text-align:center;"
! Value
! Description
|-
|align=center| terminate 
|align=center| terminates the macro (''equivalent to eventMacro stop'')
|-
|align=center| terminate_last_call
|align=center| terminates only the last call of the queue, this means that if macro 'mac1' called 'mac2' which called 'mac3', who got orphaned, only 'mac3' gets terminated, and queue returns to 'mac2'.
|-
|align=center| reregister 
|align=center| re-registers to AI queue, overriding other entries. This means to force the continuation of the macro. 
|-
|align=center| reregister_safe
|align=center| re-registers to AI queue when AI gets idle. This means the macro will continue when all other tasks are done. 
|}

; repeat
:* '''repeat''' is an optional parameter.
:* '''repeat''' defines how many times the macro defined by call will be called.
:* If not used in the automacro the default value will be used, which is: 1.
:* Must have a numeric value.

 automacro <automacro name> {
     <automacro conditions and parameters (and only them)>
     repeat 3
     call myMacro
 }
 macro myMacro {
     <macro instructions (and only them, as this is regular macro)>
     log This message will be printed 3 times, because the macro will be called 3 times
 }

; timeout
:* '''timeout''' is an optional parameter.
:* '''timeout''' defines the time in seconds before this automacro can activate again after an activation.
:* If not used in the automacro the default value will be used, which is: 0.
:* Must have a numeric value.

 automacro <automacro name> {
     <automacro conditions and parameters (and only them)>
     timeout 60
     call myMacro
 }
 macro myMacro {
     <macro instructions (and only them, as this is regular macro)>
     log This macro will only be called every 60 seconds
 }

=== Conditions ===

:* Conditions are separated into 2 categories: state and event.
:* Most conditions set special variables when the automacro activates.
:* Most conditions accept variables in their code.
:* Each automacro can only have one event condition.
:* Most state conditions can be used more than once in each automacro.
:* Each condition will have it's detailed explanation below.
:* eventMacro has a modular condition system, each file inside eventMacro/Condition is a condition.

==== State ====
:* State conditions have a defined status of true or false.
:* An automacro will only activate when all of it's state conditions are true.


;BaseLevel
:* Description: Checks the player base level.
:* Does not support percentagens in it's code.

: Syntax:
 BaseLevel <[[EventMacro#Math condition operators|Math condition operators]]>

: Example:
 BaseLevel >= 30

: Set variables:
 $.BaseLevelLast => Saves the last level that made BaseLevel become true


;CartCurrentWeight
:* Description: Checks the player's cart current weight.
:* Supports percentagens in it's code.

: Syntax:
 CartCurrentWeight <[[EventMacro#Math condition operators|Math condition operators]]>

: Example:
 CartCurrentWeight > 80%
 CartCurrentWeight > 4000

: Set variables:
 $.CartCurrentWeightLast => Saves the last cart weight that made CartCurrentWeight become true
 $.CartCurrentWeightLastPercent => Saves the last cart weight percentage that made CartCurrentWeight become true


;CartMaxWeight
:* Description: Checks the player's cart max weight.
:* Does not support percentagens in it's code.

: Syntax:
 CartMaxWeight <[[EventMacro#Math condition operators|Math condition operators]]>

: Example:
 CartMaxWeight > 4000

: Set variables:
 $.CartMaxWeightLast => Saves the last cart max weight that made CartMaxWeight become true


;CartCurrentSize
:* Description: Checks the player's cart current item quantity.
:* Supports percentagens in it's code.

: Syntax:
 CartCurrentSize <[[EventMacro#Math condition operators|Math condition operators]]>

: Example:
 CartCurrentSize > 80%
 CartCurrentSize > 4000

: Set variables:
 $.CartCurrentSizeLast => Saves the last cart item quantity that made CartCurrentSize become true
 $.CartCurrentSizeLastPercent => Saves the last cart item quantity percentage that made CartCurrentSize become true


;CartMaxSize
:* Description: Checks the player's cart max item quantity.
:* Does not support percentagens in it's code.

: Syntax:
 CartMaxSize <[[EventMacro#Math condition operators|Math condition operators]]>

: Example:
 CartMaxSize > 4000

: Set variables:
 $.CartMaxSizeLast => Saves the last cart max item quantity that made CartMaxSize become true


;CharCurrentWeight
:* Description: Checks the player's current weight.
:* Supports percentagens in it's code.

: Syntax:
 CharCurrentWeight <[[EventMacro#Math condition operators|Math condition operators]]>

: Example:
 CharCurrentWeight > 80%
 CharCurrentWeight > 4000

: Set variables:
 $.CharCurrentWeightLast => Saves the last player weight that made CharCurrentWeight become true
 $.CharCurrentWeightLastPercent => Saves the last player weight percentage that made CharCurrentWeight become true


;CharMaxWeight
:* Description: Checks the player's max weight.
:* Does not support percentagens in it's code.

: Syntax:
 CharMaxWeight <[[EventMacro#Math condition operators|Math condition operators]]>

: Example:
 CharMaxWeight > 4000

: Set variables:
 $.CharMaxWeightLast => Saves the last player max weight that made CharMaxWeight become true


;FreeStatPoints
:* Description: Checks the player's free stat points.
:* Does not support percentagens in it's code.

: Syntax:
 FreeStatPoints <[[EventMacro#Math condition operators|Math condition operators]]>

: Example:
 FreeStatPoints > 20

: Set variables:
 $.FreeStatPointsLast => Saves the last amount of free stat points that made FreeStatPoints become true


;FreeSkillPoints
:* Description: Checks the player's free skill points.
:* Does not support percentagens in it's code.

: Syntax:
 FreeSkillPoints <[[EventMacro#Math condition operators|Math condition operators]]>

: Example:
 FreeSkillPoints > 20

: Set variables:
 $.FreeSkillPointsLast => Saves the last amount of free skill points that made FreeSkillPoints become true


;CurrentHP
:* Description: Checks the player's current hp.
:* Supports percentagens in it's code.

: Syntax:
 CurrentHP <[[EventMacro#Math condition operators|Math condition operators]]>

: Example:
 CurrentHP > 80%
 CurrentHP > 4000

: Set variables:
 $.CurrentHPLast => Saves the last player hp that made CurrentHP become true
 $.CurrentHPLastPercent => Saves the last player hp percentage that made CurrentHP become true


;MaxHP
:* Description: Checks the player's max hp.
:* Does not support percentagens in it's code.

: Syntax:
 MaxHP <[[EventMacro#Math condition operators|Math condition operators]]>

: Example:
 MaxHP > 4000

: Set variables:
 $.MaxHPLast => Saves the last player max hp that made MaxHP become true


;CurrentSP
:* Description: Checks the player's current sp.
:* Supports percentagens in it's code.

: Syntax:
 CurrentSP <[[EventMacro#Math condition operators|Math condition operators]]>

: Example:
 CurrentSP > 80%
 CurrentSP > 4000

: Set variables:
 $.CurrentSPLast => Saves the last player sp that made CurrentSP become true
 $.CurrentSPLastPercent => Saves the last player sp percentage that made CurrentSP become true


;MaxSP
:* Description: Checks the player's max sp.
:* Does not support percentagens in it's code.

: Syntax:
 MaxSP <[[EventMacro#Math condition operators|Math condition operators]]>

: Example:
 MaxSP > 4000

: Set variables:
 $.MaxSPLast => Saves the last player max sp that made MaxSP become true


;InInventory
:* Description: Checks if the player has a certain quantity of an item in the inventory, uses item name.
:* Does not support percentagens in it's code.

: Syntax:
 InInventory "<item name>" <[[EventMacro#Math condition operators|Math condition operators]]>

: Note the quotation marks.

: Example:
 InInventory "Red Potion" < 10

: Set variables:
 $.InInventoryLast => Saves the name of the last item that made InInventory become true
 $.InInventoryLastAmount => Saves the amount in inventory of the last item that made InInventory become true


;InInventoryID
:* Description: Checks if the player has a certain quantity of an item in the inventory, uses item ID.
:* Does not support percentagens in it's code.

: Syntax:
 InInventoryID <item ID> <[[EventMacro#Math condition operators|Math condition operators]]>

: Example:
 InInventoryID 501 < 10

: Set variables:
 $.InInventoryIDLast => Saves the ID of the last item that made InInventoryID become true
 $.InInventoryIDLastAmount => Saves the amount in inventory of the last item that made InInventoryID become true


;InStorage
:* Description: Checks if the player has a certain quantity of an item in the storage, uses item name.
:* Does not support percentagens in it's code.

: Syntax:
 InStorage "<item name>" <[[EventMacro#Math condition operators|Math condition operators]]>

: Note the quotation marks.

: Example:
 InStorage "Blue Potion" > 100

: Set variables:
 $.InStorageLast => Saves the name of the last item that made InStorage become true
 $.InStorageLastAmount => Saves the amount in storage of the last item that made InStorage become true


;InStorageID
:* Description: Checks if the player has a certain quantity of an item in the storage, uses item ID.
:* Does not support percentagens in it's code.

: Syntax:
 InStorageID <item ID> <[[EventMacro#Math condition operators|Math condition operators]]>

: Example:
 InStorageID 507 100..500

: Set variables:
 $.InStorageIDLast => Saves the ID of the last item that made InStorageID become true
 $.InStorageIDLastAmount => Saves the amount in storage of the last item that made InStorageID become true


;InCart
:* Description: Checks if the player has a certain quantity of an item in the cart, uses item name.
:* Does not support percentagens in it's code.

: Syntax:
 InCart "<item name>" <[[EventMacro#Math condition operators|Math condition operators]]>

: Note the quotation marks.

: Example:
 InCart "Blue Potion" > 100

: Set variables:
 $.InCartLast => Saves the name of the last item that made InCart become true
 $.InCartLastAmount => Saves the amount in cart of the last item that made InCart become true


;InCartID
:* Description: Checks if the player has a certain quantity of an item in the cart, uses item ID.
:* Does not support percentagens in it's code.

: Syntax:
 InCartID <item ID> <[[EventMacro#Math condition operators|Math condition operators]]>

: Example:
 InCartID 507 100..500

: Set variables:
 $.InCartIDLast => Saves the ID of the last item that made InCartID become true
 $.InCartIDLastAmount => Saves the amount in cart of the last item that made InCartID become true



=== Extras ===

==== Math condition operators ====

(<|<=|=|==|!=|!|>=|>|)\s*($number_qr%?|$general_wider_variable_qr)(?:\s*\.\.\s*($number_qr%?|$general_wider_variable_qr))

{|class="indextable" style="text-align:center;"
!Operator
!Description
!Example
|-
|align=center| '''< <value>'''
|align=center| lower than <value>
|aling=center| '''< 50'''
|-
|align=center| '''> <value>'''
|align=center| higher than <value>
|aling=center| '''> 20'''
|-
|align=center| '''<= <value>'''
|align=center| lower or equal to <value>
|aling=center| '''<= 10'''
|-
|align=center| '''>= <value>'''
|align=center| higher or equal to <value>
|aling=center| '''>= 25'''
|-
|align=center| '''= <value> | == <value> | <value>'''
|align=center| equal to <value>
|aling=center| '''= 150 | == 150 | 150'''
|-
|align=center| '''!= <value> | ! <value>'''
|align=center| not equal to <value>
|aling=center| '''! 1000 | != 1000'''
|-
|align=center| '''<value1>..<value2>'''
|align=center| between <value1> and <value2>
|aling=center| '''20..80'''
|}

:* Note: <value> can be a number or a variable.
Examples:
 Math_condition >= 50 # Only true if higher or equal to 50
 Math_condition < $variable # Only true if lower than $variable value

:* Note2: <value> can be a percentage (even if it is a variable).
Examples:
 Math_condition <= 10% # Only true if lower or equal to 10%
 Math_condition != $variable # $variable value can be something like '50%', in which case it would only be true if different than 50%

== Perl Subroutines ==
eventMacro plugin support Perl subroutines in macros. You can now create any simple Perl function without limitations from the '''eval''' command. 

Example No.1 - how to create a Perl Subroutine function in Macro
 macro sub {
  $list = Orange, Milk, Soya, Peach
  if (existsInList("$list", "PeAch")) goto ok 
  log Not Match!!!; stop
  :ok
  log Match!!!
  $x = &eval(existsInList("$list", "PeAch"))
  log \$x = $x   # $x here is 1
 }
 sub existsInList {
   my ($list, $val) = @_;
   return 0 if ($val eq "");
   my @array = split / *, */, $list;
   $val = lc($val);
   foreach (@array) {
      s/^\s+//;
      s/\s+$//;
      s/\s+/ /g;
      next if $_ eq "";
      return 1 if lc eq $val;
   }
   return 0;
 }


Example No.2 - how to create a re-writable file function using Perl Subroutine in Macro
 automacro confHP1 {
    hp > 85%
    exclusive 1
    run-once 1
    set setting Demon Pungus   #becareful on your case, its case sensitive
    set attack 1
    set teleport 0
    set telesearch 1
    call HP
 }
 automacro confHP2 {
    hp < 75%
    exclusive 1
    run-once 1
    set setting Demon Pungus
    set attack 1
    set teleport 2
    set telesearch 1
    call HP
 }
 macro HP {
      #Getting the value of the $setting monster name Ex: $setting $exist1 $exist2 $exist3
        $exist1 = @eval (defined Misc::mon_control("$setting")?Misc::mon_control("$setting")->{attack_auto}:"None")
        $exist2 = @eval (defined Misc::mon_control("$setting")?Misc::mon_control("$setting")->{teleport_auto}:"None")
        $exist3 = @eval (defined Misc::mon_control("$setting")?Misc::mon_control("$setting")->{teleport_search}:"None")
        log Old Values are $setting $exist1 $exist2 $exist3
        log Changing the values to $setting $attack $teleport $telesearch
        do eval Misc::mon_control("$::Macro::Data::varStack{setting}")->{attack_auto} = $attack; Misc::mon_control("$::Macro::Data::varStack{setting}")->{teleport_auto} = $teleport; Misc::mon_control("$::Macro::Data::varStack{setting}")->{teleport_search} = $telesearch
        log Writting mon_control.txt with new values
        rewrite()  # see the sub-routine function below
        log Reloading mon_control.txt
        do reload mon_control
        $exist1 = @eval (defined Misc::mon_control("$setting")?Misc::mon_control("$setting")->{attack_auto}:"None")
        $exist2 = @eval (defined Misc::mon_control("$setting")?Misc::mon_control("$setting")->{teleport_auto}:"None")
        $exist3 = @eval (defined Misc::mon_control("$setting")?Misc::mon_control("$setting")->{teleport_search}:"None")
        log New mon_control.txt Setting: $setting $exist1 $exist2 $exist3
        log Macro done
     #if $teleport = 0 ; means the Higher automacro HP is currently triggered
     #if $teleport = 2 ; means the Lower automacro HP is currently triggered
        if ($teleport < 2) goto releaseHighHp
        :releaseLowHp
             release confHP1
             stop
        :releaseHighHp
             release confHP2
             stop
 }
 sub rewrite {
   my $monster = Misc::mon_control("$::Macro::Data::varStack{setting}");
   my @lines = ();
   if (open(FILE, "<:utf8", Settings::getControlFilename("mon_control.txt"))) {
      while (<FILE>) {
         s/\x{FEFF}//g; chomp;
         if (/^#/ || /^\n/ || /^\r/) {
            push @lines,$_;
            next
         }
         /^(\d+|([a-zA-Z' ]+)*) -?\d/;
         if ("$::Macro::Data::varStack{setting}" eq $1 && defined $monster) {
            $_ = $1; s/\s+$//;
            push @lines,$_ . " $monster->{attack_auto} $monster->{teleport_auto} $monster->{teleport_search} $monster->{attack_lvl} $monster->{attack_jlvl} $monster->{attack_hp} $monster->{attack_sp} $monster->{weight}"
         }
         else {push @lines,$_}
      }
      close FILE
   }
   open(FILE, ">:utf8", Settings::getControlFilename("mon_control.txt"));
   print FILE join "\n", @lines;
   close FILE;
 }

== Comments == 
The macro files allow comments, i.e. lines that are ignored by the eventMacro plugin.
:* Lines starting with a # will be treated as a comment.
:* Everything after a space and followed by a # will also be ignored.
 macro happy {
      # this is a comment line
     log I'm Happy # this is also a comment
 }

Will print:

 [eventmacro log] I'm Happy