References: Difference between revisions
Line 509: | Line 509: | ||
* [[target_whenStatusActive]] | * [[target_whenStatusActive]] | ||
* [[ | * [[target_whenStatusInactive]] | ||
|} | |} | ||
Revision as of 21:42, 9 December 2009
Syntax Legends
This section describes the syntax formatting used in declarations of configuration options and commands.
Symbol | Description |
---|---|
Bold | Kore will not reply to repeating messages from the same player. |
< > | Information that the user must specify. |
( ) | Required parameters. |
[ ] | Optional parameters. |
| | OR. This separates choices from which the user must choose only one. |
Basic Value and Parameter Types
This section describes the basic types that may appear in a configuration option's value or a command parameter.
Type | Description |
---|---|
flag | A number with special meaning on its current context. The list of meaningful values are always given. |
boolean flag | A type of flag with only two meaningful values: 1 to enable (turn on) or 0 to disable (turn off). |
number | Any number. This can be a fractional value (distance) or whole counting numbers (amount, damage, level) depending on the current context. |
percent | A number from 0 to 100 that corresponds to a percent. Don't append a percent sign (%) unless otherwise specified. |
seconds | The time specified in seconds. This can be a fractional value (e.g. 0.5). |
string | Any text string (alias name, password, callsign). See also Names (Text). |
Equipment Slots
Kore can now efficiently equip items on specific equipment slots. You can automatically equip an item on certain conditions (equipAuto), when you attack with your weapon (attackEquip), on teleport (teleportAuto_equip), and when using skills (shared skill block attribute equip).
The following is a list of equipment slots.
Name | Description |
---|---|
topHead | Specifies the top head gear to equip. |
midHead | Specifies the middle head gear to equip. |
lowHead | Specifies the lower head gear to equip. |
rightHand | Specifies the weapon to equip on the right hand. |
leftHand | Specifies the weapon or shield to equip on the left hand. |
rightAcessory | Specifies the accessory to equip on the right accessory slot. |
leftAcessory | Specifies the accessory to equip on the left accessory slot. |
armor | Specifies the armor to equip. |
robe | Specifies the garment to equip. |
shoes | Specifies the footwear to equip. |
arrow | Specifies the arrows to equip when using a bow-type weapon. |
Message Domains
Message domains are names used to classify messages printed in the console.
If you want to find out the domain of certain messages that you see in your console, set the option showDomain in config.txt to 1. Doing so will make Openkore display domains along with messages in the console.
The following is a list of known message domains:
Name | Description |
---|---|
ai_attack | Attack messages |
ai_npcTalk | Sequential conversation with NPC (talknpc) |
attacked | Monster attacks you |
attackedMiss | Monster attacks you but misses |
attackMon | You attack monster |
attackMonMiss | You attack monster but misses |
connection | Connection messages |
console | Default domain for messages that have no defined message group. (Note. You can't use this with verboseDomains and squelchDomains. |
deal | Deal messages |
drop | Monster drop related |
emotion | Emoticon |
exp | Experience gained |
equip | Equipment switching |
follow | Follow messages |
guildchat | Guild chat message |
guildnotice | Guild notice message |
info | View info that's requested by the user (status, guild info, etc.) |
input | Waiting for user input |
inventory | Inventory related messages |
list | List of information (monster list, player list, item list, etc.) |
load | Loading config files |
looter | Attacking looter |
map_event | PvP/GvG mode messages |
emotion | NPC messages |
parseMsg_statuslook | Looks (skill status or ailments, muted, summoned spirit, equipment changes, sit, stand) |
parseMsg/hairColor | Hair color change |
parseMsg/job | Job change |
parseMsg/upgrade | Item upgrading |
party | Party/follow related |
partychat | Party chat messages |
pet | Pet related messages |
plugins | Messages about plugin handling |
pm | Private chat message |
pm/sent | Private chat message sent by you |
portals | Portal exists |
portalRecord | Recording of portals |
publicchat | Public chat message |
refine | Weapon refining |
route | Routing/pathfinding messages |
route_teleport | Route teleport messages |
schat | GM broadcast messages |
selfSkill | Skills used by yourself |
skill | Skill use unrelated to attack |
sold | Item sold while vending. |
startup | Messages that are printed during startup. |
storage | Storage item added/removed |
success | An operation succeeded |
syntax | Syntax check files |
syntax | Syntax check files |
teleport | Teleporting |
useItem | You used item |
useTeleport | Attemp to use teleport |
waypoint | Waypoint messages |
xkore | X-Kore system messages |
The following is a list of debug domains.
|
|
|
|
|
Names
This section describes the names used as values in configuration options.
Equipment Names
For equipments, it is best to use the console commands to get the exact name of your items (see Item Names). However, this is only applicable if you already have that certain item in your inventory, cart or storage. If you want to specify an equipment that you don't currently possess, use the following syntax as a guide when writing down equipment names:
# for normal equipments: [BROKEN] [+<upgrade level>] (<item name>) [[<card name>[*<number>]] [<number of slots>]] # for elemental weapons [BROKEN][+<upgrade level>][VS|VVS|VVVS][Fire|Earth|Wind|Water](<item name>)
Notes:
- If the equipment is not "broken", omit the BROKEN part.
- If the equipment is not upgraded, omit the +<upgrade level> part.
- Use only the monster name for the card name (omit the "Card" part), e.g. use Hydra for the Hydra Card.
- If there is only one card of a certain type slotted on the equipment, omit the *<number> part.
- If there are more than one type of cards compounded on the equipment, the <card name>*<number> pair can be a colon-separated list. The list should be sorted alphabetically.
- If the equipment is not slotted, omit the [<number of slots>] part.
Example:
If you want to use a +4 Cranial Mirror Shield, a Hard Padded Armor, a 3-slotted +5 Double Flammable Boned Saber, and a +6 Very Very Strong Wind Tsurugi, use:
+7 Mirror Shield [Thara Frog] [1] Padded Armor [Pupa] [1] +5 Saber [Skel Worker,Vadon*2] [3] +6 VVS Wind Tsurugi
In v.1.9.x, the 3-slotted +5 Double Flammable Boned Saber described above would have to be written like the following (note the change in the card separator from comma to colon):
(V.1.9.x) +5 Saber [Skel Worker:Vadon*2] [3]
Note. So far configuration options using item names are not strict with case-sensitivity.
Item Names
The correct item names can be found by using the console commands i (inventory items), cart (cart items), and storage (storage items). You can also use store (buy list from NPC) or vender (vender shop list). Use the names as they are displayed in the lists.
You can also find the simple item names in the file tables\items.txt. For example:
2107#Mirror_Shield#
The string that appears after the first number sign (#) on each line is the item name used by Openkore. Replace the underscores (_) with space. In this case, the item name is Mirror Shield.
Note. So far configuration options using item names are not strict with case-sensitivity.
Ground Spell Names
Ground spell names can be found by using the console command spells while certain spells are active on the ground.
You can also find them in the file tables\spells.txt. For example:
126 Safety Wall
The string that appears after the first number on each line is the ground spell name used by Openkore. In this case, the ground spell name is Safety Wall.
Note. These are case-sensitive.
Map Names
Map names can be found by using the console command where.
You can also find them in the file tables\maps.txt. For example:
prontera.rsw#Prontera City#
The first word that appears on each line excluding the .rsw file extension is the map name used by Openkore. In this case, the map name is prontera.
Note. These are case-sensitive.
Monster Names
Monster names can be found by using the console command ml while certain monters are on screen.
You can also find them in the file tables\monsters.txt. For example:
1001 Scorpion
The string that appears after the first number on each line is the monster name used by Openkore. In this case, the monster name is Scorpion.
Note. These are case-sensitive.
Player Names
Player names can be found by using the console command pl while certain players are on screen.
Note. These are case-sensitive.
Skill Names
The correct skill names can be found by using the console command skills to list available skills for your character.
You can also find them in the file tables\skills.txt. For example:
NV_BASIC#Basic_Skill#
The string that appears after the first number sign (#) on each line is the skill name used by Openkore. Replace the underscores (_) with space. In this case, the skill name is Basic Skill.
Note. These are case-sensitive.
Status Names
Status names can be found by using the console command s while certain status are active on you character.
You can also find them in the files tables\skillsailments.txt, tables\skillslooks.txt, tables\skillsstate.txt, tables\skillsstatus.txt. For example:
1 Poisoned
The string that appears after the first number on each line is the status name used by Openkore. In this case, the status name is Poisoned.
Note. These are case-sensitive.
NPC Conversation Codes
These codes are used for specifying NPC talk sequences or steps when using the console command talknpc or the config.txt option storageAuto_npc_steps.
The following is a list of known NPC talk codes.
Code | Description |
---|---|
c | Continue talking to the NPC. This is the same as pressing the next when you talk to an NPC in the RO Client. |
r(<response #>) | Send response. The response number is the index of the response in the displayed response list (the first response has the index 0). This is the same as selecting a response when you talk to an NPC in the RO Client. |
w(<seconds>) | Wait for the specified number of seconds before continuing to talk to the NPC using the next talk code. |
d(<number>) | Send a number to the NPC. Use this if the NPC asks you to enter an amount. |
t=(<string>) | Send a string or text to the NPC. Use this if the NPC asks you to enter some text. |
s | Get sell list. This is the same as pressing the sell button when you talk to a buy/sell NPC in the RO Client. |
b | Get the store list. This is the same as pressing the buy button when you talk to a buy/sell NPC in the RO Client. |
b(<store item #>),(<amount>) | Buy an item from the NPC. See similar buy. Note that the amount is not optional. |
n | Immediately end or cancel conversation with the NPC. This is the same as pressing the close or cancel button when talking to an NPC in the RO Client. |
e | Wait until the NPC says "Done talking". Use this after the s or b talk code when talking to a buy/sell NPC. |
When specifying NPC talk codes, separate each code with whitespace. For example, by using the following command, you will be able to refine a weapon with the Blacksmith NPC inside Prontera, assuming you are inside the BlackSmith shop in Prontera and the NPC stands on the coordinates (63, 60).
talknpc 63 60 c r3 c r0 c c r0 c n
Range Operators
Range operators provide flexibility in specifying values for some config.txt options by specifying ranges instead of exact values. The following defines the syntax for specifying ranges.
Symbol | Description |
---|---|
X | Value is exactly equal to X |
X..Y | Includes all numbers from X to Y |
X-Y | Includes all numbers from X to Y |
> X | Value is greater than X |
>= X | Value is greater than or equal to X |
< X | Value is less than X |
<= X | Value is less than or equal to X |
The following example will change config to config_2.txt if you are a Novice whose job level is exacly equal to 10.
autoConfChange control/config_2.txt { isJob Novice joblvl 10 }
The following example will use level 1 FireBolt on a Geographer if the current SP is greater than 5 percent and the monster's deltaHp is from -8070 to -7890.
attackSkillSlot Fire Bolt { lvl 1 dist 9 sp > 5% monsters Geographer target_deltaHp -8070..-7890 }
The following example will use Heal on self if the current HP is less than 50 percent and the current SP is greater than or equal to 20 percent.
useSelf_skill Heal { lvl 10 hp < 50% sp >= 20% }
Self Conditions
These condition options are shared between the attackComboSlot, attackSkillSlot, buyAuto, doCommand, equipAuto, monsterSkill, partySkill, useSelf_item, and useSelf_skill configuration blocks.
|
Target Conditions
Monster Conditions
These condition attributes are shared between the attackComboSlot, attackSkillSlot, equipAuto, and monsterSkill configuration blocks.
Player Conditions
Currently, only the partySkill configuration block uses these conditions.
Skill Use Conditions
These options are shared between the attackComboSlot, attackSkillSlot, monsterSkill, partySkill, and useSelf_skill configuration blocks.